About Timate

A modular steel closet system drawn for the bare wall beside a bedroom door.

The Timate team in a closet fitted with wall-mounted steel racks

Our Story

Studio bedrooms rarely come with a walk-in closet, and the 8 or 9 feet of bare wall beside the door is usually all the hanging space you get. That wall is what this industrial pipe closet system was drawn for. What the star ratings never tell you is which model your studs can actually back, so start there.

You measure the run, count the studs inside the bracket span, and pick the frame that matches. One renter with a single wall and no cabinet allowance mounted the compact straight unit into two studs. A full winter wardrobe and a boot shelf went up, and the floor a freestanding rack would have eaten stayed clear. A fixed cabinet could not have been trimmed to that wall, and it would have left holes on the way out either way.

Timate ships the frames black and powder-coated, flat-packed at 23.7 to 30.6 lbs a kit. Your part is the wall, the studs behind it, and the tier heights you set on install day.

Browse every rack size

Verified buyer reviews: 1,150
Weighted average rating: 4.55★
Published load ceilings: 500–1,100 lbs
Frame depth on every model: 12.2 in

Why the Frame Is Built This Way

Published ceilings, modular runs, and a corner built to be re-tightened: the decisions behind a Timate rack meant to outlast the lease it hangs in.

Weld-Free Craftsmanship

The corner is the part that fails first on a loaded pipe rack. Screwing a one-piece arc interface into the sleeve moves the load off a bead of weld metal and into the pipe wall.

Fit the Room You Have

Rooms come with dead corners and short walls. Straight and L-shape frames let one system run flat, turn 90 degrees, or join a second unit rather than forcing a fixed cabinet footprint.

Publish the Ceiling, Not a Slogan

A single heavy-duty label across a whole range tells a buyer nothing. Each model carries its own maximum weight figure, from the compact frame up to the corner flagship.

One Session, One Person

Labeled parts and quick-connect fixtures exist so the frame goes up between lunch and dinner. The F3 documents about 30 minutes; the long corner runs ask for a second pair of hands.

Who Bolts One of These to the Wall

Renters, corner-fighters, and spare-room converts, plus the two walls where a Timate frame is the wrong buy.

The Renter Who Cannot Bolt a Fixed Cabinet Into a Lease

Your lease allows screw holes, not built-in cabinetry. A compact straight frame lands on two studs, comes off the wall in an afternoon at move-out, and leaves lag-screw holes a tub of filler closes.

The One Fighting a Dead Corner Behind the Bedroom Door

The corner behind your door holds a laundry pile and nothing else. An L3 runs the rod around both walls, turning a wasted angle into hanging space you reach for every morning.

The Spare-Room Convert Turning an Office Into a Walk-In

You have a whole wall and a desk that moved out. Two F-series units bolt into one continuous line, so the room becomes a walk-in over a weekend without a contractor quote.

The Studio Tenant Who Refuses to Give Up Floor Space

Every square foot of a studio is doing a job already. A wall-mounted rack lifts the whole wardrobe off the floor, and the X3 stands freestanding on its anti-tip device when drilling is off the table.

Where a Timate Frame Is the Wrong Buy

Skip the compact F2 if you are storing a four-person household's coats. Its single-alcove frame and 500 lb ceiling suit one bedroom wall, not a family mudroom.
Not the right fit if your wall has no studs inside the bracket span and toggle bolts are off the table, because bare drywall alone will not hold a loaded rod.